Mannlicher Schoenauer Rifle Serial Numbers

Remove the bolt by pressing the bolt stop on the left side of the receiver and pulling the bolt all the way clear. Remove the magazine by pushing a wooden pencil against the hole in the aft end of the floor plate and rotating the floor plate 90 degrees When you have the floor plate rotated, pull out on the magazine assembly and remove the magazine. With a narrow screw driver, unscrew the screws that hold the trigger guard in place. Be sure to use screw drivers that match the slots in the screws!!!! Rotate the trigger guard 90 degrees when removing the aft screw, then lift the trigger guard free.

Mar 24, 2011 I knew the gun was post-1912 based on the proofs. The name on the scope (Emil Kerner & Sohn) provided another clue as the '& Sohne' nomenclature first shows up in the mid-1920s. The serial number on the gun is 9857 and the serial number on the scope is 6581.

Under the trigger guard you gain access to the second action screw, the one at the rear end of the action, remove it, then go to the large action screw in front of the magazine. The large action screw is removed as per any Mauser style receiver Remove the forward sling swivel bail by unscrewing the bail from the stock (A) Will have to remove the nose cap from the stock also. A very small screw and a very small piece. Be Very Careful here!! Now, just tap the muzzle and all should fall out.

You have taken down your Mannlicher. Reassemble in reverse order. Note, step (A) only applies to full stock examples.

The game was ported to the Wii. Download game sengoku basara 2 heroes ps2 for pc. Sengoku Basara 2 was the 2006 sequel, also for the PS2. The fastest PS2 Emulator for Android in Global!!!!